# Vendors

> A vendor directory that tracks insurance and WorkSafeBC expiry dates, so nobody works on your property uncovered — and every quote across every job, in one list.

Source: https://managestrata.ca/docs/property/vendors

**Vendors** is everyone the corporation pays for work — the plumber, the roofer, the landscaper. Its real job isn't the phone numbers — it's the expiry dates.

The page has two tabs: **Directory**, the vendors themselves, and **Quotes**, every bid they've sent across all your maintenance jobs ([below](#the-quotes-tab)).

[Video walkthrough: Vendors in ManageStrata: know who's covered before you hand out work](https://www.youtube.com/watch?v=KZrd90vi5B4)

## Why coverage tracking matters

> **A lapsed certificate is the corporation's problem**
>
> The two certificates cover different things, and a gap in either one lands on the
> corporation — and therefore on the owners. A vendor who causes damage without
> liability insurance can leave the corporation exposed for what happened on site. A vendor working
> without a current WorkSafeBC clearance can leave the corporation liable for their
> unpaid WorkSafeBC premiums. Councils rarely check expiry dates, because nothing
> prompts them to — the certificate arrived two years ago and has been in a drawer
> since.
>
> ManageStrata warns you **before** coverage lapses. That is the point of this page.

## Adding a vendor

**Vendors → Add vendor**.

| Field | Notes |
| --- | --- |
| Name | The company or tradesperson |
| Trade | Plumbing, electrical, roofing, landscaping, elevator, cleaning… It's what the directory filters by and what ranks them against a job |
| Email and phone | Optional |
| Insurance (COI) expiry | From the certificate of insurance |
| WorkSafeBC (WCB) expiry | From their clearance letter — BC; equivalent elsewhere |
| Notes | Who to ask for, how they price, what went wrong last time. Council and managers only — the vendor never sees it |

Ask for the certificate and the clearance letter, put the dates in, and upload the documents to the [library](https://managestrata.ca/docs/documents/library).

## Reading the directory

**Vendors → Directory** is a table, one row per vendor: the name and trade, their contact details, an **Insurance (COI)** chip and a **WorkSafeBC** chip, and their researched rating. The two certificates sit in their own columns so the expiry dates line up down the page — the one that lapses next can be found by looking.

Each certificate chip reads one of four ways:

| Chip | Means |
| --- | --- |
| **Valid** | Current for more than a month, with the date it runs until |
| **Expiring** | Lapses within 30 days |
| **Expired** | Lapsed, with the date it did |
| **Not on file** | No date recorded — treated as a concern, not as fine |

Narrow the list with the filters above it:

- **Search** covers the name, trade, email and phone.
- **Trade** — the trades your vendors actually carry, plus *No trade recorded* where some have none.
- **Cover** — *Any cover*, *Fully covered*, *Needs attention* or *Expired*. **Needs attention** is the one to reach for before handing out work: expiring, expired and not on file together, because all three mean the same thing for the decision — check before you hire.
- **Source** — *Everyone*, *Yours* or *Suggested*, each with a count. Every vendor in your directory today is one your council added, so *Suggested* is empty for now; ManageStrata will propose vetted vendors there once it has some to offer for your area.

**Sort** sits beside the result count rather than with the filters, because ordering the list doesn't narrow it: *Name*, *Cover risk* (worst first) or *Rating* (unrated vendors last). **Clear filters** leaves the sort alone.

The filters are kept in the page address, so a narrowed view survives opening a vendor and pressing back — and can be bookmarked or sent to another council member. On a phone the table becomes a list of cards, each showing both certificates as a line of "what it is, until when".

## A vendor's own page

Open a vendor from the directory to see everything the corporation knows about them, and to answer the question the list can't: should we use them again?

| Section | What's there |
| --- | --- |
| **Contact and cover** | Email, phone, trade, and both certificates with their dates |
| **Notes** | What your council has written down about them |
| **Reputation** | The AI research, if anyone has run it — see [below](#ai-vendor-research) |
| **Work** | The jobs this corporation has given them, most recent first, each linking to its [work order](https://managestrata.ca/docs/property/maintenance) |
| **Paid** | What the corporation has posted against them: net of refunds and corrections, total expenses, the number of postings, and the most recent ones. **All postings** opens them in [Fund transactions](https://managestrata.ca/docs/finances/payments-and-expenses#reviewing-whats-been-recorded) |

Where a certificate has lapsed or isn't on file, the page names which one at the top — *No insurance on file*, *WorkSafeBC clearance has lapsed* — and what to ask the vendor for. A vendor with valid insurance and no WorkSafeBC date is not described as uninsured; the missing clearance is a different problem with a different consequence.

**Edit**, **Research** and **Remove** are all here, and only here. A Remove button repeated down a list is a Remove pressed by accident.

> **Do the whole directory in one sitting**
>
> Getting current certificates from every vendor you use takes a couple of
> emails and an afternoon. Doing it once, now, is far easier than discovering a
> lapse when something has already gone wrong.

## Vendor Compliance

> **Council plan:** The Vendor Compliance agent is included on the Council plan and above.

It watches the expiry dates and warns you before a vendor's COI or WorkSafeBC coverage lapses, proposing a reminder for you to send. Like every agent, it proposes and a person decides. See [Suggestions](https://managestrata.ca/docs/ai/agents).

## AI vendor research

For a vendor you're considering, AI research fills in what it can find about them so you're not starting from a blank record. On the vendor's page, press **Research** (or **Research again**): it reads their Google Business listing — the rating, the review count, what recent reviews say — and writes it up under **Reputation** with a fit verdict for their trade. The page shows which listing was read, because a search can turn up a same-named business somewhere else.

> **Verify before you rely on it**
>
> Researched details are a starting point. **Insurance and WorkSafeBC status must
> always be verified from the actual certificate and clearance letter.** Never
> enter a coverage date you haven't seen documented — that's precisely the field
> where a plausible-looking wrong answer causes real harm.

## Using the directory

When you [assign a work order](https://managestrata.ca/docs/property/maintenance#assigning-a-vendor), the job's **Who could do it** list offers your vendors **ranked**, a row each, showing the trade, the certificate status and whatever the research turned up. Three things decide the order (press **Find the best fit** on the job and AI re-ranks them against its description instead):

1. **Trade relevance.** Matched on what the job describes rather than on the word you typed, so *"leaking pipe"* still finds a plumber.
2. **Coverage.** A vendor with a current COI *and* a current WorkSafeBC clearance ranks above one whose certificate is expiring, expired or not on file — and the row names which certificate it is, rather than calling a vendor with valid insurance "uninsured". The ranking shouldn't help you hire someone without cover.
3. **Reputation.** The researched rating and fit verdict, where there is one.

Keep **Notes** on the vendor's page as you go — who was quick, who over-quoted, who did the job that failed two years later. Councils turn over; institutional memory about vendors otherwise leaves with the outgoing president.

## Getting quotes

For anything substantial, get three. They belong on the [work order](https://managestrata.ca/docs/property/maintenance#getting-prices), which compares them, states the spread, marks the lowest, and tells you what a spend of that size needs approving. Accepting one gives that vendor the job.

You can also send a vendor a **quote link** — **Ask a vendor to quote** on the job — and let them file their own bid: no account, no password, and nobody retyping a PDF at nine at night. [How the links work →](https://managestrata.ca/docs/property/maintenance#let-the-vendor-file-their-own-bid)

Owners will ask, and a council that can produce three quotes and a minuted reason for choosing one of them is in a very different position from one that can't.

> **A quote must name a vendor from this directory**
>
> Unlike an expense — where a historic posting may have no payee — a quote can't be
> filed without one. A bid from nobody can't be compared, can't be phoned back, and
> can't be insurance-checked, and the check is the point: the certificate status is
> only knowable for a vendor the directory holds.

### The Quotes tab

**Vendors → Quotes** lists every quote the corporation has recorded, across every job, **newest first** — because the question it answers is *"where's that quote we got?"*, and the recent ones are the ones people go looking for. The tab carries a count of the quotes awaiting a decision.

| Column | Shows |
| --- | --- |
| **Vendor** | Who sent it (linked to their directory page), and their reference if they gave one |
| **Job** | The work order, which opens at its quotes, and the first line of the scope |
| **Amount** | The price |
| **Status** | **Awaiting decision** — the job is open and no bid is accepted yet; **Accepted** — the bid the council took; **Not chosen** — another bid on the job was accepted; **Job closed** — the job finished or was cancelled with no bid accepted |
| **Valid until** | For a bid still awaiting a decision, the same Valid / Expiring / Expired chip as a certificate; otherwise just the date, or *No expiry stated* |
| **Received** | The day it was recorded |
|  | **View quote**, opening the vendor's PDF, where one was attached |

Narrow it with **All**, **Awaiting decision** or **Accepted**, each with a count. On a phone each bid is a card instead of a row.

It's a finding aid, not a second place to decide. Accepting, removing and recording a quote all stay on the [job](https://managestrata.ca/docs/property/maintenance#getting-prices), where the competing bids, the approval the spend needs and the vendor's cover sit side by side. With no quotes yet, the tab says where they're recorded and offers **Go to maintenance**. Quotes are council and manager only, here as on the job.

## Ongoing contracts

Elevator servicing, landscaping, cleaning, management — recurring contracts have renewal and notice dates that matter. Record the vendor here, upload the contract to the [library](https://managestrata.ca/docs/documents/library), and put the renewal date on [Compliance](https://managestrata.ca/docs/compliance/tracked-duties) as a tracked duty. Auto-renewing contracts with a short notice window are a classic way for a council to lose a year.

## Removing a vendor

Open the vendor, then **Remove**. The confirm step shows what's on file and, where they've been given work, how many work orders name them.

- **A vendor you've never paid** can be removed. Their work orders keep the name as the record of who did the job, but the link to the contact goes — their certificates stop being tracked.
- **A vendor you've paid can't be removed at all.** The books keep who was paid, and a posting that lost its payee would be a hole in them. If the name is wrong, correct it with **Edit** instead.

## A yearly review

Once a year, ideally alongside the budget:

- Is every coverage date current?
- Are the rates still competitive?
- Is anyone on the list you'd no longer call?
- Do you have a backup for each critical trade?

That last one matters more than it sounds. At 2am with water coming through a ceiling, "who do we call?" needs to have an answer already.
