# Council and roster

> One table of everyone connected to your corporation — one row per person, council first, filterable by role and status and searchable by name, lot or position.

Source: https://managestrata.ca/docs/people/roster

**Council & roster** is the list of everyone: council members, your property manager, and every owner.

## How the list is arranged

The roster is one table, with **one row per person**: **Member** (name and email), **Roles**, **Lot**, and **Access** — whether they have an account, and the invitation buttons if they don't.

Someone who holds several roles is still one row. A council member who owns lot 204 shows *Council* and *Owner* stacked in the Roles column, with their position under the role it goes with, and *204* in the Lot column. An owner of three lots is one *Owner* line, with all three lots listed. The same name never appears twice.

Rows run in the same order every time: the **council** first, then the **property manager**, then the **owners**. With no filter set, "who is on our council?" is answered by the top of the table, not by reading every row to the end.

On a phone, Roles and Lot fold under the member's name; Access stays a column of its own.

### Finding someone

The search box above the table matches on **name, email address, lot number and position** at once, so a council member who knows the lot and not the owner can type `302` — or `lot 302` — and get the person. Several words narrow together: `smith council` finds the Smith who sits on the council.

Two filters sit beside it:

- **Role** — *Council*, *Manager* or *Owner*. Only roles somebody actually holds are offered.
- **Status** — *Current members*, *Past seats*, or *Current and past*, each with its count.

The count under the filters tells you how many people you're looking at, and **Clear filters** puts the whole roster back. The filters are kept in the page address, so a narrowed list survives a reload.

> **Where past seats show**
>
> A seat that has ended stays on the person's row while they hold anything else
> here: an owner who stood down from council still has their row, with
> *Council* tagged *Past* under their current roles and **Restore council seat**
> beside **Edit**. Somebody with no current seat at all — most often an owner who
> sold — isn't in the table by default. Choose **Status → Past seats** to see
> them, faded, with **Restore** on the row.

## Seats, not just roles

A person's connection to the corporation is a **seat**. One person can hold more than one at a time, and this is the part worth understanding before you change anything:

- An **owner seat** is held for a lot. Own two lots, hold two owner seats.
- A **council seat** is held for the corporation, not for a lot. An owner elected to council keeps their owner seat and gains a second one.
- A **manager seat** is held under a contract.

That's why electing an owner to the council doesn't take anything away from them, and why ending a council seat doesn't stop them being an owner.

## Adding someone

**Council & roster → Add member**.

| Field | Notes |
| --- | --- |
| Name | Appears on ballots, work orders, minutes |
| Email | Where their notices go, and the address they'll sign in with |
| Role | `Owner`, `Council` or `Manager` — see [roles and permissions](https://managestrata.ca/docs/basics/roles-and-permissions) |
| Email them an invitation now | Ticked by default. Untick it to record them without contacting them |

**Position** and **lot** aren't on this form. Set them afterwards from the row's **Edit**.

Adding someone records who they are; the invitation is what gives them a login — see [invitations and logins](https://managestrata.ca/docs/people/invitations).

> **Don't use Add member for someone already on the roster**
>
> To put an existing owner on the council, elect them from their own row — see below.
> Adding them again is how you end up with the same person on the roster twice:
> a mistyped email address doesn't match the record you meant to reuse, so it
> creates a second one.

## Putting someone on the council

Find them on the roster, open **Edit** on their row, and use **Add to council**.

Before it commits, you're shown what the seat gives them: everything the council can see and change — finances, documents, the roster and every meeting. Any lot they own stays theirs, because a council seat is held for the corporation rather than for a lot, so this adds a seat beside the one they already hold rather than changing it.

Someone who has served before goes back onto the same seat with a new term start; when their last term ended stays in the [audit trail](https://managestrata.ca/docs/account/privacy-and-data).

Once they're elected, *Council* joins *Owner* on their row, and the row moves up among the council at the top. Set their position — president, treasurer, secretary — from the same **Edit**.

## Role and position are different things

**Role** controls what the software lets them see. **Position** is a label for the roster and the minutes.

A treasurer and a member-at-large both have the Council role and identical access. The position tells owners who does what and gives minutes the right names; it doesn't grant powers.

> **There's no finance-only role**
>
> A bookkeeper who enters transactions needs Council or Manager, which is full
> management access. Give it to someone you'd trust with the chequebook, because
> that's the equivalent. Every action is recorded against their name in the
> [audit trail](https://managestrata.ca/docs/account/privacy-and-data).

## Attaching people to lots

An owner's lot is set from their row: **Edit**, then **Lot**. For an owner of one lot, choosing another lot there moves them to it.

Attach an owner to their lot and several things start working: their fees post to that lot's [ledger](https://managestrata.ca/docs/finances/owner-ledgers), they can vote on resolutions attached to it, their balance shows in [their portal](https://managestrata.ca/docs/basics/owner-portal), and [Form F](https://managestrata.ca/docs/forms/strata-forms) for that lot can be generated from real data.

**Jointly owned lots.** Add each owner, all attached to the same lot. They all see the account. Voting rights belong to the lot — one vote for it, however many owners there are.

**One person, several lots.** They're one row, with every lot in the Lot column, and they see each account. Their **Edit** says *Owns lots …* in place of the Lot field: with more than one lot, a single field can't say which one it would move, so ownership is changed on each lot's own **Edit** on [Lots](https://managestrata.ca/docs/property/units-and-lots).

**A lot owned by a company or trust.** Record the entity as the owner and the individual as the contact, so notices reach a human being.

### A council member or manager who owns a lot

For a council member or manager, the lot field reads **Also owns lot** instead — **Also owns another lot**, once they own one. Choosing a lot there records them as an **owner** of it — a separate owner seat, beside their council or manager seat, shown on the same row — and the banner says so: *"Saved. Pat Lee is now recorded as an owner of lot 103."* That owner seat is what makes them show as the lot's owner on [Lots](https://managestrata.ca/docs/property/units-and-lots) and everywhere else ownership is read.

It only ever adds. It doesn't replace the lot's other owners — a co-owner joining is exactly what it's for — and it never ends anyone's ownership. To record that they no longer own the lot, use the lot on **Lots**.

A council member or manager who owns a lot also gets a **My lot** group at the foot of their sidebar, with their own **Account & payments** and [**Lot information sheet**](https://managestrata.ca/docs/property/lot-information-sheets). See [the dashboard tour](https://managestrata.ca/docs/basics/dashboard-tour#the-sidebar-for-council-and-managers).

## Keeping it current after an AGM

Council changes at the AGM, and updating the roster is the step that gets forgotten.

  1. **Elect the incoming council**

   Anyone already on the roster — which is every owner — is elected from their
   own row. Someone new to the corporation is added first, then invited.
  1. **End the outgoing council's seats**

   Open their row, **Edit**, then **End council seat**. Their owner seat is
   untouched, so they keep their own account and portal; what ends is the
   access to everything else. This is the important one: an outgoing treasurer
   whose council seat is still active keeps the ability to move money.
  1. **Update positions**

   New president, treasurer, secretary.
  1. **Minute it**

   The election result belongs in the
   [minutes](https://managestrata.ca/docs/meetings/minutes-and-directives).

> **Do this the same week**
>
> Not "at some point". Access that should have ended at the AGM and didn't is the
> kind of thing that only becomes a problem in the worst circumstances.

## When a lot sells

  1. **Add the new owner**

   **Add member**, with the Owner role.
  1. **Make them the lot's owner on Lots**

   Open the lot's **Edit** on [Lots](https://managestrata.ca/docs/property/units-and-lots) and
   choose them as **Roster member**. That ends the seller's owner seat on that
   lot — it becomes a past seat — and gives the new owner theirs. Choosing
   **No owner recorded** ends the seller's seat without naming a buyer.
  1. **End the seller's council or manager seat**

   Only if they held one. A departing council member who is also selling has
   two seats, and the council one is the one with access attached.
  1. **Invite the new owner**

   So they can see their account and pay.
  1. **Check parking and lockers**

   They often change hands with the sale.
   [Lots →](https://managestrata.ca/docs/property/units-and-lots)

The ledger stays with the **lot**, not the person — see [owner ledgers](https://managestrata.ca/docs/finances/owner-ledgers).

The [lot information sheet](https://managestrata.ca/docs/property/lot-information-sheets#when-a-lot-sells) doesn't. When a lot's last owner seat ends, or another owner is picked on Lots, the lot's sheet, emergency contacts and tenancy are archived to **Earlier records** on the lot's page, and the new owners start with an empty sheet. If the change was a mistake rather than a sale, **Restore** on the archived sheet puts it back.

> **Ownership ends on the lot, not on the roster**
>
> There's no control on the roster that ends an owner's seat, on purpose — a
> hundred one-tap paths to revoking portal access is not something to put beside a
> list you scroll. A sale is recorded on the lot. A lot with more than one owner on
> record can't be changed from that dropdown; ask support if a co-owner has sold
> their share.

## Contact details

The email on a person's record is where their notices, announcements and invitations go. It is the single most consequential field on the roster: a wrong address means an owner isn't receiving meeting notice, which is a procedural problem as well as a practical one.

Ask owners to keep you updated, and check the list once a year.

> **Contact details are council-only**
>
> Owners can't see the roster's contact details. Personal information is held under
> PIPA/PIPEDA and shouldn't be circulated to the building. See
> [privacy and data](https://managestrata.ca/docs/account/privacy-and-data).

## Ending a seat

A term ends, a contract ends, someone stands down. Open their row, **Edit**, then **End council seat** — or **End manager seat** — at the bottom.

You're asked to type the person's name to confirm, then **End the seat** — deliberately, because the rows either side of the one you're looking at belong to different people.

**What you're shown first.** A summary of what the seat takes away, and whether they hold anything else here. Ending a council seat held by an owner ends the council seat and nothing else; where it's their only seat, you're told that they lose access to this corporation entirely.

**Where the row goes.** Nowhere, if they hold anything else here. An owner who stood down from council keeps their row: the council line is tagged *Past*, and the row drops back among the owners. Someone whose only seat it was leaves the table's default view for **Status → Past seats**. Either way the record of who held the seat survives — it just stops counting as somebody who holds one, so the council rows list the council. A council seat also records the date its term ended.

**Undo.** A seat ended by mistake has **Restore council seat** (or **Restore manager seat**) beside **Edit** on the row — just **Restore**, for someone with nothing else left. Use it for a mis-click, not for someone re-elected — a new term should be a new election, so the term start reads true.

> **Only seats the corporation granted**
>
> **End council seat** and **End manager seat** are offered on those seats only, which exist because the
> corporation put somebody there. An owner's seat isn't in the corporation's gift:
> it exists because they own a lot, and it ends when the lot changes hands — a
> transfer with a completion date and a new owner to record. Handle a sale as a
> sale, below.

> **Someone who can sign in has to be left**
>
> A corporation with nobody on council or as manager who can sign in has nobody
> who can put somebody back — including nobody who can undo it. So a seat can't
> be ended when it's the last council or manager seat, or when nobody else on the
> council or as manager has signed in yet. Someone added by name, or with an
> invitation they haven't accepted, doesn't count: an invitation can expire, go to
> a mistyped address, or never be opened.
>
> Add the incoming person, have them accept their invitation, then end the
> outgoing seat. Ending your *own* seat is fine; resigning is ordinary.

Everything here is recorded against your name in the [audit trail](https://managestrata.ca/docs/account/privacy-and-data).

## A useful yearly check

- Does every lot have at least one owner recorded?
- Filtered to **Role → Council**, does it list exactly the council, and nobody else?
- Is every council member's position current?
- Does **Status → Past seats** account for everyone who has stood down?
- Does every email address still work?
