# Your first week

> A running order for getting a real corporation onto ManageStrata — what to do on day one, what can wait, and what to leave until after your next meeting.

Source: https://managestrata.ca/docs/getting-started/first-week-checklist

You do not have to do all of this at once. This is the order that causes the least rework, drawn from what actually blocks what.

> **The app keeps this list for you**
>
> **Setup** tracks the same ground and shows how far along you are. It
> reads your actual data rather than a box someone ticked, so it can't claim
> credit for work that wasn't done — and it says, for each value, where in your
> own paperwork to find it and what happens if you leave it. See
> [the setup checklist](#the-setup-checklist).

## Day one — about 45 minutes

  1. **Register the corporation**

   Start with your strata plan number — if the SearchStrata registry knows
   your building, you confirm it and start. Five minutes, and it works out
   your compliance deadlines and creates your lots.
   [How →](https://managestrata.ca/docs/getting-started/set-up-your-corporation)
  1. **Set your fiscal year**

   **Settings → Financial controls**. Budgets, financial statements
   and closing the books all key off it. Setting it after you've entered
   transactions means re-checking which period they landed in.
  1. **Check your lots**

   **Lots**. If registration added them, rename any that owners know
   by suite number and add each lot's unit entitlement. If it didn't,
   **Paste a list** adds the whole building at once. Either way, check the
   unit entitlements sum correctly.
   [How →](https://managestrata.ca/docs/getting-started/add-units-and-lots)
  1. **Add the council**

   **Council & roster → Add member**, then **Add email & invite** for
   each. [How →](https://managestrata.ca/docs/getting-started/invite-your-people)
  1. **Turn on compliance reminders**

   **Settings → Compliance**. This is the single highest-value
   switch in the product: the council gets warned 180, 90, 30 and 7 days before every
   statutory deadline.

## Day two or three — the documents

Uploading your library is the step that makes everything else searchable, and it is worth doing properly once.

  1. **Upload the essentials first**

   Registered bylaws and any amendments, the last three years of AGM and SGM
   minutes, the last two years of financial statements, the current insurance
   policy and certificate, and the depreciation report if you have one.
  1. **Wait for processing**

   Each file shows a status until it has been read and indexed. Only then can it
   be quoted with page citations.
   [How →](https://managestrata.ca/docs/documents/library)
  1. **Run a red-flag scan**

   **Documents → Red flags** reads what you uploaded and surfaces water
   damage, litigation, special levies and other risks recorded in your own
   minutes. New councils routinely find something they didn't know about.
   [How →](https://managestrata.ca/docs/documents/red-flags)

## Day three or four — the money

This is the part people put off. It is also the part that makes the software worth paying for.

  1. **Record your opening balances**

   Enter the current operating and contingency reserve fund balances as at the
   date you're starting from. Everything after this date gets entered as it
   happens. [How →](https://managestrata.ca/docs/finances/overview)
  1. **Enter each lot's opening position**

   If some owners are in arrears, record what they owe now so their ledger
   starts honest. [How →](https://managestrata.ca/docs/finances/owner-ledgers)
  1. **Bill this period's strata fees**

   If your budget is already in ManageStrata and adopted, bill from it —
   **Finances → Budget** splits it across the lots by unit entitlement
   and bills the month. Otherwise **Charge all lots** on
   **Finances** bills every lot a flat amount to get you started —
   it leads the **Get your books started** card while the books are empty,
   and sits under **More** after that.
   [How →](https://managestrata.ca/docs/finances/billing-strata-fees)
  1. **Tell owners how to pay**

   Card payment isn't live yet, so owners need to know where to send a cheque
   or e-transfer. Say it in your welcome
   [announcement](https://managestrata.ca/docs/people/announcements) and record what arrives.
   [How →](https://managestrata.ca/docs/finances/payments-and-expenses)

> **Start at a clean date**
>
> Pick the first day of a month or, better, the first day of your fiscal year.
> Entering three years of back-history is rarely worth it — an opening balance plus
> accurate records from a clean start date gives you everything you need going
> forward, and the old statements are in your [document library](https://managestrata.ca/docs/documents/library)
> anyway.

## Day five — the building

  1. **Add your regular vendors**

   **Vendors → Add vendor** with trade, insurance (COI) expiry and
   WorkSafeBC expiry. The expiry dates are the point: ManageStrata warns you
   before a vendor's coverage lapses.
   [How →](https://managestrata.ca/docs/property/vendors)
  1. **Log the repairs already in flight**

   Anything currently outstanding, as a work order.
   [How →](https://managestrata.ca/docs/property/maintenance)
  1. **Seed the component list**

   **Assets & reserve study**. If you have a depreciation report,
   record it and seed the component list from it. If you don't, you're about to
   find out when yours is due.
   [How →](https://managestrata.ca/docs/property/assets-and-reserve-study)

## Then — bring in the owners

Once the council has used it for a week and the balances look right, invite the building. Post an [announcement](https://managestrata.ca/docs/people/announcements) first, then send the invitations.

Ask each owner, once they're in, to fill in their lot's [information sheet](https://managestrata.ca/docs/property/lot-information-sheets) — emergency contacts, who holds a key, and whether the lot is rented. It replaces the paper owner information form, and it's the page you'll want when something goes wrong in a lot whose owner is away.

## After your next meeting

Some things are best done once, at the next AGM or council meeting:

- **Approve a budget** in the system so your financial statements can compare actual against budget. [How →](https://managestrata.ca/docs/finances/budgets)
- **Run the meeting in ManageStrata** end to end, so you have one clean worked example — notice, agenda, quorum, votes, minutes. [How →](https://managestrata.ca/docs/meetings/running-a-meeting)
- **Close the books** on the prior fiscal year once owners have had those financials. [How →](https://managestrata.ca/docs/finances/statements-and-closing)

## The setup checklist

**Setup**. Eight steps, each with what the value is, where to find it in your own paperwork, and what happens if you leave it. The step to do next is marked **Next** and carries the one filled button on the page. Other steps read **To do**, or **Waiting** if they depend on one before them.

It's derived from your data, not from a stored flag, so it can't go stale and it can't claim credit for work that wasn't done. Delete the lots and the lots step un-ticks itself.

| Step | Why it's on the list |
| --- | --- |
| Register your corporation | Works out your compliance deadlines |
| Add your strata lots | Nothing financial works without them |
| Record unit entitlement | Sets every strata fee under s.99 |
| Link owners to lots | Who gets the ledger, the portal and the notices |
| Upload your bylaws | What the documents can be asked about |
| State your opening balance | The difference between books that reconcile and books that don't |
| Adopt the annual budget | What fees are billed from |
| Decide on interest for overdue fees | A blank quietly means "we may not charge interest" |

> **Two steps you finish by saying no**
>
> Most corporations have **no bylaw setting an interest rate**, and one formed
> last month has **no previous books**. A blank is a real answer to both, so you
> can settle them explicitly and finish the list — rather than being nagged
> forever toward a charge you have no authority to make. Open **This doesn't
> apply to us** on the step, add a reason for the record if you like, and choose
> **Mark not applicable**. The step then reads *Not applicable*, and
> **Reopen this step** undoes it.

> **Unit entitlement is the one to get right**
>
> A lot with no entitlement recorded falls back to an **equal share**. That is not
> the s.99 formula — it is a s.100 formula, and using one needs a **unanimous
> vote**. The checklist says so at the step, and the count of blank lots is shown
> so you know how far off you are.

## Am I done?

You are in good shape when all of these are true:

- **Compliance** shows no action needed that you didn't already know about.
- Every lot exists, with an entitlement, and most have an owner attached.
- The two fund balances match your bank.
- The bylaws and last three years of minutes are uploaded and processed.
- Your council can all sign in.
