# Add your lots

> Register every strata lot once and the rest of the system works — billing, votes, Form B, and reserve contributions all depend on this list.

Source: https://managestrata.ca/docs/getting-started/add-units-and-lots

Your lot list is the backbone of the corporation. Almost nothing else works properly until it exists, because so much is calculated *per lot*: strata fees, vote weight, owner ledgers, Form B, and the share of a special levy each owner pays.

If you left **Add my lots now** ticked when you [registered](https://managestrata.ca/docs/getting-started/set-up-your-corporation), or started the trial, the lots are already there — skip to [if your lots were created for you](#if-your-lots-were-created-for-you). Otherwise go to **Lots → Add lot**.

[Video walkthrough: Units & lots in ManageStrata: one register for every strata lot](https://www.youtube.com/watch?v=O8OI-2DmYh4)

## What each field is for

### Identifier

The lot's label as owners know it — `101`, `SL-14`, `Unit 3B`. Whatever you type here appears on invoices, ballots, work orders and forms, so use the form owners will recognise. Be consistent: `101` and `Unit 101` in the same building will look like two lots to a person skimming a list.

### Type

Residential, commercial, parking, storage, and so on. Type is descriptive — it does not change the arithmetic — but it makes lists filterable and stops a commercial unit being mistaken for an apartment on a report.

### Floor / level

Optional, and useful mainly for maintenance ("third floor leak"). There's an **Area (sq ft)** box beside it, also optional.

### Unit factor (unit entitlement)

> **Get this one right**
>
> Unit entitlement is the number from your registered strata plan that says what
> share of the corporation each lot owns. It decides how strata fees are split, how
> a special levy is allocated, and — where your bylaws use it — how much a vote
> weighs. Copy it from the strata plan, not from memory.

If every lot in your building is identical, entitlements are often equal, and you can leave them all at the same number. In mixed buildings they will differ, sometimes considerably. When they are wrong, every fee bill and every levy is wrong in proportion.

### Parking stalls and storage lockers

The stalls and lockers assigned to the lot, e.g. `P-14, P-15`. These are recorded for reference and appear on Form B, which asks about parking and storage.

### Owner

Chosen from the [roster](https://managestrata.ca/docs/people/roster), not typed. Leave it empty if the owner isn't on the roster yet — you can choose them later.

## Adding a whole building at once

For anything beyond a handful of lots, use **Lots → Paste a list** and paste your rows instead of typing them one at a time.

One lot per line: **identifier, unit factor, type**. A header row is optional, and the unit factor and type can be left blank. Type must be one of Residential, Commercial, Live/work, Parking, Storage, Amenity / common or Other.

```csv
SL1, 1.25, Residential
SL2, 1.00, Residential
SL3
```

  1. **Build your list**

   A spreadsheet with one row per lot. Most councils already have this
   somewhere — the fee schedule or the strata plan schedule of unit
   entitlement.
  1. **Paste the rows**

   Copy the three columns from the spreadsheet and paste them into the box,
   then choose **Add these lots**.
  1. **Read the result**

   The page says how many lots were added, how many duplicates were skipped,
   and how many rows couldn't be read. Then check the unit factor column in
   the list — if your entitlements are meant to sum to a round number and
   don't, you have a typo.

Floor, parking, lockers and the owner aren't part of the list — add them with each lot's **Edit**. Owners are added from the roster or the lot itself, never from this box.

The list sorts lots as numbers, so `1, 2, 10` reads in that order rather than `1, 10, 2` — and `A2` comes before `A10`.

## If your lots were created for you

Registration creates your lots when you leave **Add my lots now** ticked or start the Council trial — as many as your lot count, numbered `1`, `2`, `3` and so on, the way the strata plan numbers them. Nothing else is filled in, so there are two jobs left:

- **Rename them if owners know them by suite number.** Choose **Edit** on the lot and change its identifier — lot `7` might be `Unit 305` to everyone in the building.
- **Add each lot's unit entitlement**, from the strata plan. The registry doesn't hold it, and until you add it every lot counts as an equal share.

Check the count against your strata plan too. The registry is a good starting point, not an authority — if a lot is missing, add it; if there's one too many, remove it before anything is billed to it.

> **Created on Free?**
>
> Registration creates every lot, even on Free with more than Free's four. The
> corporation then becomes read-only 14 days after registering unless it
> subscribes. [More lots than the plan covers →](https://managestrata.ca/docs/account/plans-and-billing#more-lots-than-the-plan-covers)

> **Lots first, invite second**
>
> Register the lots *before* you invite owners. When you add an owner you attach
> them to a lot, and an owner with no lot has no ledger, no vote, and no invoice.

## If a lot is refused

The lot register is where your plan limit is enforced, so a plan that is too small shows up here rather than at the till.

**Free covers 4 lots.** Adding a fifth is refused with a sentence that names the fix:

> Your Free plan covers 4 lots and 4 are registered. Upgrade to Council for unlimited lots to add more. Council is free for the first 30 days, no card needed.

If your building is in the SearchStrata registry with more than four lots, [registration](https://managestrata.ca/docs/getting-started/set-up-your-corporation#start-from-your-strata-plan-number) offers the free trial up front, and creates the lots for you.

You may also see a heads-up **before** you start adding, when the lot count you declared at [registration](https://managestrata.ca/docs/getting-started/set-up-your-corporation) is larger than your plan covers. That is on purpose: discovering the limit on lot 5 of 31 reads like the software is broken, rather than like a plan that needs changing.

> **Two limits, two different fixes**
>
> A refusal naming your **plan** ("Your Free plan covers 4 lots") means upgrade
> under **Settings → Billing**. A refusal naming your **corporation**
> ("Your corporation is registered as having 12 lots") means the declared lot
> count in **Settings → Corporation** is lower than the building — correct
> it there and carry on. Read which noun the message uses.
> [Plans and billing →](https://managestrata.ca/docs/account/plans-and-billing)

## Attaching owners to lots

Owners are not created here — they live on the [roster](https://managestrata.ca/docs/people/roster). Once a lot exists, you can add the person who owns it and their contact details, and from that point:

- their strata fees post to that lot's ledger;
- they can vote on resolutions attached to their lot;
- their invoices and balance show in [their own portal](https://managestrata.ca/docs/basics/owner-portal);
- Form F for that lot can be generated from real data.

A lot with no owner recorded is still a valid lot — it will simply show *No owner recorded*, and it will still be billed when you **Charge all lots**.

## Changes over time

**A lot sells.** Update the owner on the roster; the lot, its ledger and its history stay where they are. The outgoing owner's balance is a matter for the conveyance — generate a [Form F](https://managestrata.ca/docs/forms/strata-forms) to certify what is owed on the lot as at the completion date.

**Lots are combined or split.** Rare, and it changes unit entitlement across the corporation. Edit the affected lots, then re-check any open special levy allocation.

**A lot is entered twice.** Remove the duplicate before it is billed. Once charges exist against it, the tidy path is to cancel the invoices with a reason rather than delete anything — see [fixing mistakes](https://managestrata.ca/docs/finances/corrections).

## Checking your work

Before you move on, the lot list should satisfy three things:

- the number of lots matches the count you entered when you [registered the corporation](https://managestrata.ca/docs/getting-started/set-up-your-corporation);
- the unit entitlements sum to whatever your strata plan says they should;
- every identifier is unique and reads the way owners say it out loud.
